Heat exchange type single facer machine for corrugated board making
Product Description
Heat exchange type single facer machine for corrugated board making
Product Description:
1. The use of suction hood structure, with high - pressure strong fan. The air suction is equipped with sound attenuation device
2. The wallboard cast iron structure, wallboard thickness of 130mm. Adopt independent gearbox and Universal joint drive.
3. The corrugated roller material is made of 48 CrMo alloy steel, after tempering, medium frequency quenching, surface polishing and tungsten-carbide treating, corrugated roller diameter 290 mm, surface hardness above HV1200 degrees
4. corrugated roller and pressing roller adopt pneumatic pressure, buffer and shock absorbing, long using life.
5. The pneumatic control to glue back glue, glue spreader with 215 mm diameter surface after polishing line after pit type checker processing hard chromium plating processing, scraping the rubber roller surface after grinding hard chromium plating processing.
6. It adopts 4 groups of heating pipe to heat the oil, quick heating, no need for heating boiler, automatic control of the temperature and or two groups to control.
7. the oil strong closed-loop circulating, low pressure of the system, no leakage, cyclic using of the heat, less lose of the heating energy.
8. The heating roller installed with stir ring, high efficiency of heating, the roller heating evenly, good forming of the flute.
Technical parameter:
Effective width | 1400mm |
Design speed | 100m/min |
Temperature range | 200-260 |
corrugated roller diameter | 290mm |
Product Categories : single facer line
Premium Related Products